ZyXEL Communications NBG-418N v2 User Manual
Chapter 6 Wireless LAN
NBG-418N v2 User’s Guide
61
6.2 What You Can Do
Wireless screens vary according to the device mode you are using.
See
for more information on device modes.
• Use the General screen to enable the Wireless LAN, enter the SSID and select the wireless
security mode (
).
• Use the MAC Filter screen to allow or deny wireless stations based on their MAC addresses from
connecting to the NBG-418N v2 (
• Use the Advanced screen to allow intra-BSS networking and set the RTS/CTS Threshold (
• Use the WPS screen to quickly set up a wireless network with strong security, without having to
configure security settings manually (
• Use the WPS Station screen to add a wireless station using WPS (
• Use the Scheduling screen to set the times your wireless LAN is turned on and off (
).
• Use the AP Select screen to choose an access point that you want the NBG-418N v2 (in
universal repeater mode) to connect to. You should know the security settings of the target AP
(
(
).
• Use the MBSSID screen to view the SSID and security of the selected AP wireless network
(
).
6.3 What You Should Know
Every wireless network must follow these basic guidelines.
• Every wireless client in the same wireless network must use the same SSID.
The SSID is the name of the wireless network. It stands for Service Set IDentity.
Wireless Screen
Router
Access Point
Universal Repeater
General
MAC Filter
Advanced
QoS
WPS
WPS Station
Scheduling
AP Select