ZyXEL Communications NWA3000-N User Manual

 Chapter 10 Device HA

NWA3000-N Series User’s Guide

The following table describes the labels in this screen.   

The following section contains additional technical information about the features 
described in this chapter.

The master and backup NWA3000-N series AP form a single ‘virtual router’. In the 
following example, master NWA3000-N series AP A and backup NWA3000-N 
series AP B form a virtual router.

Figure 60   Virtual Router 

Table 46   Device HA > Active-Passive Mode > Edit Monitored Interface

Enable 
Monitored 
Interface

Select this to have device HA monitor the status of this interface’s 
connection.  

Interface 
Name

This identifies the interface.

Virtual Router 
IP (VRIP) / 
Subnet Mask

This is the interface’s (static) IP address and subnet mask in the virtual 
router. Whichever NWA3000-N series AP is currently serving as the 
master uses this virtual router IP address and subnet mask. These fields 
are blank if the interface is a DHCP client or has no IP settings.

Manage IP

Enter the interface’s IP address for management access. You can use 
this IP address to access the NWA3000-N series AP whether it is the 
master or a backup. This management IP address should be in the same 
subnet as the interface IP address. 

Manage IP 
Subnet Mask

Enter the subnet mask of the interface’s management IP address.

OK

Click OK to

 

save your changes back to the NWA3000-N series AP.

Cancel

Click Cancel to exit this screen without saving your changes.

A

B