ZyXEL Communications NWA3000-N User Manual

Chapter 15 System

NWA3000-N Series User’s Guide

Test whether the SSH service is available on the NWA3000-N series AP. 

Enter “

telnet 192.168.1.2 22

” at a terminal prompt and press [ENTER]. The 

computer attempts to connect to port 22 on the NWA3000-N series AP (using 

the default IP address of 192.168.1.2). 
A message displays indicating the SSH protocol version supported by the 

NWA3000-N series AP. 

Figure 98   SSH Example 2: Test 

Enter “

ssh –1 192.168.1.2

”. This command forces your computer to connect to 

the NWA3000-N series AP using SSH version 1. If this is the first time you are 
connecting to the NWA3000-N series AP using SSH, a message displays prompting 
you to save the host information of the NWA3000-N series AP. Type “

yes

” and 

press [ENTER]. 

Then enter the password to log in to the NWA3000-N series AP. 

Figure 99   SSH Example 2: Log in

The CLI screen displays next. 

You can use Telnet to access the NWA3000-N series AP’s command line interface. 
Click Configuration > System > TELNET to configure your NWA3000-N series 
AP for remote Telnet access. Use this screen to enable or disable Telnet and set 
the server port number. 

$ telnet 192.168.1.2 22

Trying 192.168.1.2...

Connected to 192.168.1.2.

Escape character is '^]'.

SSH-1.5-1.0.0

$ ssh –1 192.168.1.2

The authenticity of host '192.168.1.2 (192.168.1.2)' can't be established.

RSA1 key fingerprint is 21:6c:07:25:7e:f4:75:80:ec:af:bd:d4:3d:80:53:d1.

Are you sure you want to continue connecting (yes/no)? yes

Warning: Permanently added '192.168.1.2' (RSA1) to the list of known hosts.

Administrator@192.168.1.2's password: