ZyXEL Communications NWA3000-N User Manual

Chapter 15 System

NWA3000-N Series User’s Guide

To change your NWA3000-N series AP’s FTP settings, click Configuration > 
System > FTP tab. The screen appears as shown. Use this screen to specify FTP 
settings.

Figure 101   Configuration > System > FTP

The following table describes the labels in this screen.  

Table 76   Configuration > System > FTP

Enable

Select the check box to allow or disallow the computer with the IP 
address that matches the IP address(es) in the Service Control table to 
access the NWA3000-N series AP using this service.

TLS required

Select the check box to use FTP over TLS (Transport Layer Security) to 
encrypt communication.

This implements TLS as a security mechanism to secure FTP clients and/
or servers.

Server Port

You may change the server port number for a service if needed, however 
you must use the same port number in order to use that service for 
remote management.

Server 
Certificate

Select the certificate whose corresponding private key is to be used to 
identify the NWA3000-N series AP for FTP connections. You must have 
certificates already configured in the My Certificates screen.

Apply

Click Apply to save your changes back to the NWA3000-N series AP. 

Reset

Click Reset to return the screen to its last-saved settings.