ZyXEL Communications NBG-419N User Manual
Chapter 12 Wireless LAN
NBG-419N v2 User’s Guide
110
Click Network > Wireless LAN > Advanced. The screen appears as shown.
Figure 78
Network > Wireless LAN > Advanced
The following table describes the labels in this screen.
Table 47
Network > Wireless LAN > Advanced
LABEL
DESCRIPTION
RTS/CTS
Threshold
Threshold
Data with its frame size larger than this value will perform the RTS (Request To Send)/CTS
(Clear To Send) handshake.
(Clear To Send) handshake.
Fragmentation
Threshold
Threshold
The threshold (number of bytes) for the fragmentation boundary for directed messages. It is
the maximum data fragment size that can be sent. Enter an even number.
the maximum data fragment size that can be sent. Enter an even number.
Enable Intra-
BSS Traffic
BSS Traffic
A Basic Service Set (BSS) exists when all communications between wireless clients or
between a wireless client and a wired network client go through one access point (AP).
between a wireless client and a wired network client go through one access point (AP).
Intra-BSS traffic is traffic between wireless clients in the BSS. When Intra-BSS is enabled,
wireless client A and B can access the wired network and communicate with each other.
When Intra-BSS is disabled, wireless client A and B can still access the wired network but
cannot communicate with each other.
wireless client A and B can access the wired network and communicate with each other.
When Intra-BSS is disabled, wireless client A and B can still access the wired network but
cannot communicate with each other.
Output Power
Set the output power of the Router in this field. If there is a high density of APs in an area,
decrease the output power of the Router to reduce interference with other APs. Select one of
the following 100%, 90%, 75%, 50%, 25%, 10% or Minimum. See the product
specifications for more information on your Router’s output power.
decrease the output power of the Router to reduce interference with other APs. Select one of
the following 100%, 90%, 75%, 50%, 25%, 10% or Minimum. See the product
specifications for more information on your Router’s output power.
Network Mode
Select 11b/g mixed mode to allow IEEE802.11b and IEEE802.11g compliant WLAN devices
to associate with the Router.
to associate with the Router.
Select 802.11b only to allow only IEEE 802.11b compliant WLAN devices to associate with
the Router.
the Router.
Select 802.11g only to allow only IEEE 802.11g compliant WLAN devices to associate with
the Router.
the Router.
Select 802.11n only to allow only IEEE 802.11n compliant WLAN devices to associate with
the Router.
the Router.
Select 11b/g/n mixed mode to allow IEEE802.11b, IEEE802.11g and IEEE802.11n
compliant WLAN devices to associate with the Router.
compliant WLAN devices to associate with the Router.