ZyXEL Communications NBG-419N User Manual

Chapter 12 Wireless LAN

NBG-419N v2 User’s Guide

Use this screen to enable/disable WPS, view or generate a new PIN number and check current WPS 
status. To open this screen, click Network > Wireless LAN > WPS tab.

Network > Wireless LAN > WPS

The following table describes the labels in this screen.

Network > Wireless LAN > WPS

WPS Setup

Enable WPS

Select this to enable the WPS feature.

PIN Number

This displays a PIN number last time system generated. Click Generate to generate a 
new PIN number.

Status

Status

This displays Configured when the Router has connected to a wireless network using 
WPS or when Enable WPS is selected and wireless or wireless security settings have 
been changed. The current wireless and wireless security settings also appear in the 
screen.

This displays Unconfigured if WPS is disabled and there are no wireless or wireless 
security changes on the Router or you click Release_Configuration to remove the 
configured wireless and wireless security settings.

Release 
Configuration

This button is only available when the WPS status displays Configured.

Click this button to remove all configured wireless and wireless security settings for WPS 
connections on the Router.

802.11 Mode

This is the 802.11 mode used. Only compliant WLAN devices can associate with the 
Router.

SSID

This is the name of the wireless network.

Security

This is the type of wireless security employed by the network.

Apply

Click Apply to save your changes back to the Router.

Cancel

Click Cancel to reload the previous configuration for this screen.