ZyXEL Communications NBG-419N User Manual

Chapter 22 Bandwidth Management

NBG-419N v2 User’s Guide

The sum of the bandwidth allotments that apply to the WAN interface (LAN to WAN, WLAN to WAN) 
must be less than or equal to the Upstream Bandwidth that you configure in the Bandwidth 
Management Advanced screen (

The sum of the bandwidth allotments that apply to the LAN interface (WAN to LAN, WAN to WLAN) 
must be less than or equal to the Downstream Bandwidth that you configure in the Bandwidth 
Management Advanced screen 

. 

Use this screen to have the Router apply bandwidth management.

Click Management > Bandwidth Management to open the bandwidth management General 
screen.

Management > Bandwidth Management > General   

The following table describes the labels in this screen.

Use this screen to configure bandwidth management rules for the pre-defined services or 
applications. 

You can also use this screen to configure bandwidth management rule for other services or 
applications that are not on the pre-defined list of Router. Additionally, you can define the source 
and destination IP addresses and port for a service or application.

Management > Bandwidth Management > General

Enable 
Bandwidth 
Management 

This field allows you to have Router apply bandwidth management. 

Enable bandwidth management to give traffic that matches a bandwidth rule priority over 
traffic that does not match a bandwidth rule. 

Enabling bandwidth management also allows you to control the maximum or minimum 
amounts of bandwidth that can be used by traffic that matches a bandwidth rule. 

Apply

Click Apply to save your customized settings.

Reset

Click Reset to begin configuring this screen afresh.