ZyXEL Communications NWA-1100 User Manual

Chapter 11 Remote Management

ZyXEL NWA-1100 User’s Guide

Use this screen to configure your ZyXEL Device for remote Telnet access. You can use Telnet 
to access the ZyXEL Device’s Command Line Interface (CLI).
Click REMOTE MGNT > TELNET. The following screen displays.

Figure 50   Remote Management: Telnet

The following table describes the labels in this screen.

Use this screen to upload and download the ZyXEL Device’s firmware using FTP. To use this 
feature, your computer must have an FTP client.
To change your ZyXEL Device’s FTP settings, click REMOTE MGMT > FTP. The 
following screen displays.

Table 29   Remote Management: Telnet

TELNET

Server Port

You can change the server port number for a service if needed, however you must 

use the same port number in order to use that service for remote management.

Server 

Access

Select the interface(s) through which a computer may access the ZyXEL Device 

using Telnet.

Secured 

Client IP 

Address

A secured client is a “trusted” computer that is allowed to communicate with the 

ZyXEL Device using this service. 
Select All to allow any computer to access the ZyXEL Device using this service.
Choose Selected to just allow the computer with the IP address that you specify to 

access the ZyXEL Device using this service.

Secured 

Client MAC 

Address

Select All to allow any computer to access the ZyXEL Device using this service.
Choose Selected to just allow the computer with the MAC address that you specify 

to access the ZyXEL Device using this service.

Apply

Click Apply to save your customized settings and exit this screen. 

Reset

Click Reset to begin configuring this screen afresh.