ZyXEL Communications NWA-1100 User Manual

 Chapter 11 Remote Management

ZyXEL NWA-1100 User’s Guide

Figure 51   Remote Management: FTP

The following table describes the labels in this screen.

Use this screen to configure your ZyXEL Device via the World Wide Web (WWW) using a 
Web browser. This lets you specify which IP addresses or computers are able to communicate 
with and access the ZyXEL Device. 
To change your ZyXEL Device’s WWW settings, click REMOTE MGNT > WWW. The 
following screen shows.

Table 30   Remote Management: FTP

Server Port

You may change the server port number for a service if needed, however you must 

use the same port number in order to use that service for remote management.

Server Access

Select the interface(s) through which a computer may access the ZyXEL Device 

using this service.

Secured Client IP 

Address

A secured client is a “trusted” computer that is allowed to communicate with the 

ZyXEL Device using this service. 
Select All to allow any computer to access the ZyXEL Device using this service.
Choose Selected to just allow the computer with the IP address that you specify to 

access the ZyXEL Device using this service.

Secured Client 

MAC Address

Select All to allow any computer to access the ZyXEL Device using this service.
Choose Selected to just allow the computer with the MAC address that you 

specify to access the ZyXEL Device using this service.

Apply

Click Apply to save your customized settings and exit this screen. 

Reset

Click Reset to begin configuring this screen afresh.