ZyXEL Communications NWA-1100 User Manual

 Chapter 3 Status Screens

ZyXEL NWA-1100 User’s Guide

Use this screen to view read-only information, including 802.11 Mode, Channel ID, Retry 
Count and FCS Error Count. Also provided is the "poll interval".  The Poll Interval field is 
configurable. The fields in this screen vary according to the current wireless mode of each 
WLAN adaptor.
Click Status > Show Statistics. The following screen pops up.

Figure 12   System Status: Show Statistics

The following table describes the labels in this screen.

LAN

This field displays the number of wireless clients currently associated to 

the first wireless module. Each wireless module supports up to 32 

concurrent associations. 

WLAN

This field displays the number of wireless clients currently associated to 

the second wireless module. Each wireless module supports up to 32 

concurrent associations.

System Status

Statistics

Click this link to view port status and packet specific statistics. See 

.

Association List

Click this to see a list of wireless clients currently associated to each of the 

ZyXEL Device’s wireless modules. See 

.

View Log

Click this to see a list of logs produced by the ZyXEL Device. See 

Table 2   The Status Screen

Table 3   System Status: Show Statistics

Description

802.11 Mode

This field shows which mode (802.11b Only, 802.11g Only, 802.11b+g) the 

ZyXEL Device is using.

Channel ID

Click this to see which wireless channels are currently in use in the local area. 

.

RX PKT

This is the number of received packets on this port.

TX PKT

This is the number of transmitted packets on this port.

Retry Count

This is the total number of retries for transmitted packets (TX).

FCS Error

This is the ratio percentage showing the total number of checksum error of 

received packets (RX) over total RX.