ZyXEL Communications HS100/HS100W User Manual

HomeSafe User’s Guide 

14-2 

 

Remote Management Screens 

3.  The IP address in the Secured Client IP field does not match the client IP address. If it 

does not match, the HomeSafe will disconnect the session immediately. 

4.  There is already another remote management session with an equal or higher priority 

running. You may only have one remote management session running at one time. 

5.  There is a firewall rule that blocks it. 

When NAT is enabled: 

¾  Use the HomeSafe’s WAN IP address when configuring from the WAN.  
¾  Use the HomeSafe’s LAN IP address when configuring from the LAN. 

There is a default system management idle timeout of five minutes (three hundred seconds). The 

HomeSafe automatically logs you out if the management session remains idle for longer than this 

timeout period. The management session does not time out when a statistics screen is polling. 

You can change the timeout period in the System screen 

To change your HomeSafe’s World Wide Web settings, click REMOTE MGMT to display the 

WWW screen.  

The following table describes the labels in this screen. 

Server Port 

You may change the server port number for a service if needed, however you must 
use the same port number in order to use that service for remote management.