ZyXEL Communications HS100/HS100W User Manual
HomeSafe User’s Guide
Remote Management Screens
14-3
Table 14-1 Remote Management : WWW
LABEL DESCRIPTION
Server Access
Select the interface(s) through which a computer may access the HomeSafe using
this service.
this service.
Secured Client
IP Address
IP Address
A secured client is a “trusted” computer that is allowed to communicate with the
HomeSafe using this service.
HomeSafe using this service.
Select All to allow any computer to access the HomeSafe using this service.
Choose Selected to just allow the computer with the IP address that you specify to
access the HomeSafe using this service.
access the HomeSafe using this service.
Apply
Click Apply to save your customized settings and exit this screen.
Reset
Click Reset to begin configuring this screen afresh.
14.3 Configuring Telnet
You can configure your HomeSafe for remote Telnet access as shown next. The administrator
uses Telnet from a computer on a remote network to access the HomeSafe.
Figure 14-2 Telnet Configuration on a TCP/IP Network
14.4 Configuring TELNET
Click REMOTE MGMT and the TELNET tab to display the screen as shown.