ZyXEL Communications ISG50 User Manual
Chapter 7 General Tutorials
ISG50 User’s Guide
108
7.1.1 Configure a WAN Ethernet Interface
You need to assign the ISG50’s wan1 interface a static IP address of 1.2.3.4.
Click Configuration > Network > Interface > Ethernet and double-click the wan1 interface’s
entry. Select Use Fixed IP Address and configure the IP address, subnet mask, and default
gateway settings and click OK.
entry. Select Use Fixed IP Address and configure the IP address, subnet mask, and default
gateway settings and click OK.
Figure 72
Configuration > Network > Interface > Ethernet > Edit wan1
7.1.2 Configure Port Roles
Here is how to take the P4 port from the lan2 interface and add it to the dmz interface.
1
Click Configuration > Network > Interface > Role.
2
Under P4 select the dmz (DMZ) radio button and click Apply.
Figure 73
Configuration > Network > Interface > Port Roles Example
7.1.3 Configure Zones
Do the following to create a VPN zone.
1
Click Configuration > Network > Zone and then double-click the IPSec_VPN entry.