ZyXEL Communications ISG50 User Manual
Chapter 7 General Tutorials
ISG50 User’s Guide
109
2
Select WIZ_VPN and move it to the Member box and click OK.
Figure 74
Configuration > Network > Zone > IPSec_VPN Edit
7.2 How to Configure a Cellular Interface
Use 3G cards for cellular WAN (Internet) connections. See www.zyxel.com for a list of the
compatible 3G devices. In this example you connect the 3G USB card before you configure the
cellular interfaces but is also possible to reverse the sequence.
compatible 3G devices. In this example you connect the 3G USB card before you configure the
cellular interfaces but is also possible to reverse the sequence.
1
Make sure the 3G device’s SIM card is installed.
2
Connect the 3G device to one of the ISG50’s USB ports.
3
Click Configuration > Network > Interface > Cellular. Select the 3G device’s entry and click
Edit.
Edit.
Figure 75
Configuration > Network > Interface > Cellular
4
Enable the interface and add it to a zone. It is highly recommended that you set the Zone to WAN
to apply your WAN zone security settings to this 3G connection. Leaving Zone set to none has the
ISG50 not apply any security settings to the 3G connection. Enter the PIN Code provided by the
cellular 3G service provider (0000 in this example).
to apply your WAN zone security settings to this 3G connection. Leaving Zone set to none has the
ISG50 not apply any security settings to the 3G connection. Enter the PIN Code provided by the
cellular 3G service provider (0000 in this example).