ZyXEL Communications ISG50 User Manual
Chapter 12 Interfaces
ISG50 User’s Guide
269
• Zero or one VLAN interfaces (and any associated virtual VLAN interfaces)
• Any number of Ethernet interfaces (and any associated virtual Ethernet interfaces)
• Any number of Ethernet interfaces (and any associated virtual Ethernet interfaces)
When you create a bridge interface, the ISG50 removes the members’ entries from the routing
table and adds the bridge interface’s entries to the routing table. For example, this table shows the
routing table before and after you create bridge interface br0 (250.250.250.0/23) between lan1
and vlan1.
table and adds the bridge interface’s entries to the routing table. For example, this table shows the
routing table before and after you create bridge interface br0 (250.250.250.0/23) between lan1
and vlan1.
In this example, virtual Ethernet interface lan1:1 is also removed from the routing table when lan1
is added to br0. Virtual interfaces are automatically added to or remove from a bridge interface
when the underlying interface is added or removed.
is added to br0. Virtual interfaces are automatically added to or remove from a bridge interface
when the underlying interface is added or removed.
12.7.1 Bridge Summary
This screen lists every bridge interface and virtual interface created on top of bridge interfaces. To
access this screen, click Configuration > Network > Interface > Bridge.
access this screen, click Configuration > Network > Interface > Bridge.
Figure 184
Configuration > Network > Interface > Bridge
Each field is described in the following table.
Table 76
Example: Routing Table Before and After Bridge Interface br0 Is Created
IP ADDRESS(ES)
DESTINATION
IP ADDRESS(ES)
DESTINATION
210.210.210.0/24
lan1
221.221.221.0/24
vlan0
210.211.1.0/24
lan1:1
230.230.230.192/26
wan2
221.221.221.0/24
vlan0
241.241.241.241/32
dmz
222.222.222.0/24
vlan1
242.242.242.242/32
dmz
230.230.230.192/26
wan2
250.250.250.0/23
br0
241.241.241.241/32
dmz
242.242.242.242/32
dmz
Table 77
Configuration > Network > Interface > Bridge
LABEL
DESCRIPTION
Add
Click this to create a new entry.
Edit
Double-click an entry or select it and click Edit to open a screen where you can modify
the entry’s settings.
the entry’s settings.
Remove
To remove an entry, select it and click Remove. The ISG50 confirms you want to
remove it before doing so.
remove it before doing so.
Activate
To turn on an entry, select it and click Activate.
Inactivate
To turn off an entry, select it and click Inactivate.
Create Virtual
Interface
Interface
To open the screen where you can create a virtual interface, select an interface and
click Create Virtual Interface.
click Create Virtual Interface.