ZyXEL Communications ISG50 User Manual

Chapter 12 Interfaces

ISG50 User’s Guide

This screen lets you configure IP address assignment, interface bandwidth parameters, DHCP 
settings, and connectivity check for each bridge interface. To access this screen, click the Add icon 
at the top of the Add column in the Bridge Summary screen, or click an Edit icon in the Bridge 
Summary screen. The following screen appears.

Object References

Select an entry and click Object References to open a screen that shows which 
settings use the entry. See 

#

This field is a sequential value, and it is not associated with any interface.

Status

This icon is lit when the entry is active and dimmed when the entry is inactive.

Name

This field displays the name of the interface.

IP Address

This field displays the current IP address of the interface. If the IP address is 0.0.0.0, 
the interface does not have an IP address yet.

This screen also shows whether the IP address is a static IP address (STATIC) or 
dynamically assigned (DHCP). IP addresses are always static in virtual interfaces.

Member

This field displays the Ethernet interfaces and VLAN interfaces in the bridge interface. It 
is blank for virtual interfaces.

Apply

Click Apply to save your changes back to the ISG50.

Reset

Click Reset to return the screen to its last-saved settings. 

Configuration > Network > Interface > Bridge (continued)