ZyXEL Communications ISG50 User Manual
Chapter 30 Outbound Trunk Group
ISG50 User’s Guide
501
Available
Interface
Interface
For DDI/DID, AA, and Direct, this list displays the available slots and ports on the
ISG50. Click one slot and port and then click the Right icon if you want to add it to this
outbound group.
ISG50. Click one slot and port and then click the Right icon if you want to add it to this
outbound group.
Used Interface
For DDI/DID, AA, and Direct, this list displays the ports currently configured for this
outbound line group. Click one port and click the Left icon if you want to remove it from
the outbound group.
outbound line group. Click one port and click the Left icon if you want to remove it from
the outbound group.
If you configure more than one interfaces in this outbound line group, the ISG50 check
and pick one of them available for an outgoing call.
and pick one of them available for an outgoing call.
Number
This field displays for MSN. There the MSN number the interface is to use.
Used Interface
This field displays for MSN. Select the BRI port and the MSN number the interface is to
use.
use.
DDI/DID Mapping
Setting
Setting
Use this section to configure your DDI mapping table.
DDI/DID Mask
Enter a number (0~20) to identify the extension mapping digits from right to left, so a
DDI mask of 2 applied to the incoming ISDN number 555-123456 would identify the
numbers 56.
DDI mask of 2 applied to the incoming ISDN number 555-123456 would identify the
numbers 56.
Add
Click this to add a new entry to the local net list.
Remove
Click this to delete the selected item(s) in this list.
#
This field is a sequential value, and it is not associated with a specific entry.
DDI/DID Number
This is the DDI number.
Extension
Number
Number
This is the DDI number’s associated extension number.
Outgoing Calling
Party Number
Party Number
Prefix
Enter a number to add in the beginning of the outgoing caller’s numbers using this trunk
line. This field can be 0-20 digits in length.
line. This field can be 0-20 digits in length.
Calling Party
Number
Number
Use this section to set your outgoing calling party numbers. These are what the callee
sees when the ISG50 sends a call out through this BRI trunk.
sees when the ISG50 sends a call out through this BRI trunk.
DDI/DID or Directory Number (If not match DDI) - Select this to have calls going
out through this BRI trunk use the DDI/DID if the outgoing call matches it or the number
defined in the Directory Number field if the outgoing call does not match the DDI/DID.
out through this BRI trunk use the DDI/DID if the outgoing call matches it or the number
defined in the Directory Number field if the outgoing call does not match the DDI/DID.
Directory Number - Select this to have calls going out through this BRI trunk use the
number defined in the Directory Number field.
number defined in the Directory Number field.
DDI/DID or User Define Number (If not match DDI) - Select this to have calls going
out through this BRI trunk use the DDI/DID if the outgoing call matches it or another
number that you specify if the outgoing call does not match the DDI/DID. Enter the
number in the field. This field can be 3-20 digits in length.
out through this BRI trunk use the DDI/DID if the outgoing call matches it or another
number that you specify if the outgoing call does not match the DDI/DID. Enter the
number in the field. This field can be 3-20 digits in length.
User Define - Select this to have calls going out through this BRI trunk use a number
that you specify. Enter the number in the field. This field can be 3-20 digits in length.
that you specify. Enter the number in the field. This field can be 3-20 digits in length.
Extension - Select this to have calls going out through this BRI trunk use the caller’s
extension number.
extension number.
Hide Calling Party
Number
Number
Select this to not have your calling party number display on the callee’s caller ID. This
option only applies to calls going out through this BRI trunk that do not match the DDI/
DID.
option only applies to calls going out through this BRI trunk that do not match the DDI/
DID.
OK
Click OK to save your customized settings and exit this screen.
Cancel
Click Cancel to exit this screen without saving.
Table 173
BRI Trunk Add/Edit (continued)
LABEL
DESCRIPTION