ZyXEL Communications ISG50 User Manual
Chapter 30 Outbound Trunk Group
ISG50 User’s Guide
502
30.2.9 Add BRI Trunk DDI/DID Mapping
Use this screen to add or edit DDI/DID mapping table entries. Click the Add icon in the DDI/DID
Mapping Setting section of the BRI Trunk - Add configuration screen to view the screen as
shown.
Mapping Setting section of the BRI Trunk - Add configuration screen to view the screen as
shown.
Figure 323
Add BRI Trunk DDI/DID Mapping
Each field is described in the following table.
30.2.10 Auto-Attendant for Incoming BRI Calls
Use this screen to select which auto-attendant should be used with this outbound line group. The
fields in this screen are the same as the fields in the FXO trunk auto-attendant screen. Refer to
fields in this screen are the same as the fields in the FXO trunk auto-attendant screen. Refer to
for detailed field descriptions.
Table 174
Add BRI Trunk DDI/DID Mapping
LABEL
DESCRIPTION
Number
Enter the DDI number. This field can be 1-10 digits or 1-10 digits - 1-10 digits (two sets of
up to ten digits separated by a hyphen). For example, 5783900 or 5783900-5783999.
up to ten digits separated by a hyphen). For example, 5783900 or 5783900-5783999.
Extension
Number
Number
Enter the DDI number’s associated extension number. This field can be 1-10 digits or 1-10
digits - 1-10 digits (two sets of up to ten digits separated by a hyphen). For example,
5783900 or 5783900-5783999.
digits - 1-10 digits (two sets of up to ten digits separated by a hyphen). For example,
5783900 or 5783900-5783999.
OK
Click OK to save your customized settings and exit this screen.
Cancel
Click Cancel to exit this screen without saving.