ZyXEL Communications ISG50 User Manual
Chapter 52 System
ISG50 User’s Guide
666
52.2 Host Name
A host name is the unique name by which a device is known on a network. Click Configuration >
System > Host Name to open the Host Name screen.
System > Host Name to open the Host Name screen.
Figure 441
Configuration > System > Host Name
The following table describes the labels in this screen.
52.3 USB Storage
The ISG50 can use a connected USB device to store the system log and other diagnostic
information. Use this screen to turn on this feature and set a disk full warning limit.
information. Use this screen to turn on this feature and set a disk full warning limit.
Note: Only connect one USB device. Make sure the USB device also uses its external
power supply if it has one. It must allow writing (it cannot be read-only) and use
the FAT32, EXT2, or EXT3 file system.
Table 264
Configuration > System > Host Name
LABEL
DESCRIPTION
System Name
Choose a descriptive name to identify your ISG50 device. This name can be up to
64 alphanumeric characters long. Spaces are not allowed, but dashes (-)
underscores (_) and periods (.) are accepted.
64 alphanumeric characters long. Spaces are not allowed, but dashes (-)
underscores (_) and periods (.) are accepted.
Domain Name
Enter the domain name (if you know it) here. This name is propagated to DHCP
clients connected to interfaces with the DHCP server enabled. This name can be
up to 254 alphanumeric characters long. Spaces are not allowed, but dashes “-”
are accepted.
clients connected to interfaces with the DHCP server enabled. This name can be
up to 254 alphanumeric characters long. Spaces are not allowed, but dashes “-”
are accepted.
Apply
Click Apply to save your changes back to the ISG50.
Reset
Click Reset to return the screen to its last-saved settings.