ZyXEL Communications ISG50 User Manual
Chapter 52 System
ISG50 User’s Guide
668
To change your ISG50’s time based on your local time zone and date, click Configuration >
System > Date/Time. The screen displays as shown. You can manually set the ISG50’s time and
date or have the ISG50 get the date and time from a time server.
System > Date/Time. The screen displays as shown. You can manually set the ISG50’s time and
date or have the ISG50 get the date and time from a time server.
Figure 443
Configuration > System > Date and Time
The following table describes the labels in this screen.
Table 266
Configuration > System > Date and Time
LABEL
DESCRIPTION
Current Time and
Date
Date
Current Time
This field displays the present time of your ISG50.
Current Date
This field displays the present date of your ISG50.
Time and Date
Setup
Setup
Manual
Select this radio button to enter the time and date manually. If you configure a
new time and date, time zone and daylight saving at the same time, the time
zone and daylight saving will affect the new time and date you entered. When
you enter the time settings manually, the ISG50 uses the new setting once you
click Apply.
new time and date, time zone and daylight saving at the same time, the time
zone and daylight saving will affect the new time and date you entered. When
you enter the time settings manually, the ISG50 uses the new setting once you
click Apply.
New Time (hh-mm-
ss)
ss)
This field displays the last updated time from the time server or the last time
configured manually.
When you set Time and Date Setup to Manual, enter the new time in this
field and then click Apply.
configured manually.
When you set Time and Date Setup to Manual, enter the new time in this
field and then click Apply.
New Date
(yyyy-mm-dd)
(yyyy-mm-dd)
This field displays the last updated date from the time server or the last date
configured manually.
When you set Time and Date Setup to Manual, enter the new date in this
field and then click Apply.
configured manually.
When you set Time and Date Setup to Manual, enter the new date in this
field and then click Apply.