ZyXEL Communications NWA1100-N User Manual

Chapter 12 Remote Management

NWA1100-N User’s Guide

timeout period. The management session does not time out when a statistics screen is polling. You 
can change the timeout period in the SYSTEM screen.

Use this screen to configure your NWA for remote Telnet access. You can use Telnet to access the 
NWA’s Command Line Interface (CLI).

Click REMOTE MGNT > TELNET. The following screen displays.

Remote Management: Telnet

The following table describes the labels in this screen.

Use this screen to upload and download the NWA’s firmware using FTP. To use this feature, your 
computer must have an FTP client.

Remote Management: Telnet

TELNET

Server Port

You can change the server port number for a service if needed, however you must 
use the same port number in order to use that service for remote management.

Server 

Access

Select the interface(s) through which a computer may access the NWA using 
Telnet.

Secured 

Client IP 

Address

A secured client is a “trusted” computer that is allowed to communicate with the 
NWA using this service. 

Select All to allow any computer to access the NWA using this service.

Choose Selected to just allow the computer with the IP address that you specify 
to access the NWA using this service.

Secured 

Client MAC 

Address

Select All to allow any computer to access the NWA using this service.

Choose Selected to just allow the computer with the MAC address that you 
specify to access the NWA using this service.

Apply

Click Apply to save your customized settings and exit this screen. 

Reset

Click Reset to begin configuring this screen afresh.