ZyXEL Communications NWA1100-N User Manual
Chapter 8 Wireless Security Screen
NWA1100-N User’s Guide
94
The following table describes the labels in this screen.
8.4.4.2 Wireless Client
Use this screen to employ WPA as the security mode for your NWA that is in Wireless Client
operating mode. Select WPA in the Security Mode field to display the following screen.
operating mode. Select WPA in the Security Mode field to display the following screen.
Figure 41
Security: WPA for Wireless Client
Table 26
Security: WPA for Access Point
LABEL
DESCRIPTION
Security Settings
Profile Name
This is the name that identifying this profile.
Security Mode
Choose WPA in this field.
Rekey Options
ReAuthentication
Timer
Timer
Specify how often wireless stations have to resend user names and passwords in
order to stay connected.
order to stay connected.
Enter a time interval between 10 and 9999 seconds. Alternatively, enter “0” to
turn reauthentication off.
turn reauthentication off.
Note: If wireless station authentication is done using a RADIUS server, the
reauthentication timer on the RADIUS server has priority.
Group Key
Update
Update
The Group Key Update Timer is the rate at which the AP sends a new group
key out to all clients. The re-keying process is the WPA equivalent of
automatically changing the group key for an AP and all stations in a WLAN on a
periodic basis. Setting of the Group Key Update Timer is also supported in
WPA-PSK mode.
key out to all clients. The re-keying process is the WPA equivalent of
automatically changing the group key for an AP and all stations in a WLAN on a
periodic basis. Setting of the Group Key Update Timer is also supported in
WPA-PSK mode.
Apply
Click Apply to save your changes.
Reset
Click Reset to begin configuring this screen afresh.
Back
Click Back to return to the previous screen.