ZyXEL Communications NWA1100-N User Manual
Chapter 8 Wireless Security Screen
NWA1100-N User’s Guide
95
The following table describes the labels in this screen.
8.4.5 Security: WPA2 or WPA2-MIX
This screen varies depending on whether you select Access Point or Wireless Client in the
Wireless > Wireless Settings screen.
Wireless > Wireless Settings screen.
8.4.5.1 Access Point
Use this screen to use WAP2 or WPA2-MIX as the security mode for your NWA that is in Access Point
operating mode. Select WPA2 or WPA2-MIX in the Security Mode field to display the following
screen.
operating mode. Select WPA2 or WPA2-MIX in the Security Mode field to display the following
screen.
Figure 42
Security:WPA2 or WPA2-MIX for Access Point
Table 27
Security: WPA for Wireless Client
LABEL
DESCRIPTION
Security Settings
Profile Name
This is the name that identifying this profile.
Security Mode
Choose the same security mode used by the AP.
Data Encryption
Select between None and TKIP.
IEEE802.1x Authentication
EAP Type
The options on the left refer to EAP methods. You can choose either TLS, LEAP,
PEAP or TTLS.
PEAP or TTLS.
The options on the right refer to authentication protocols. You can choose
between MSCHAPv2 and GTC.
between MSCHAPv2 and GTC.
User Information
Username
Supply the username of the account created in the RADIUS server.
Password
Supply the password of the account created in the RADIUS server.
Apply
Click Apply to save your changes.
Reset
Click Reset to begin configuring this screen afresh.
Back
Click Back to return to the previous screen.