ZyXEL Communications G-3000H User Manual

G-3000H User’s Guide

Chapter 17 LAN Setup

191

The following table describes the fields in this menu.

Table 69   Menu 3.5.5 Layer-2 Isolation

Allow devices with 

these MAC 

addresses

These are the MAC address of a wireless client, AP, computer or router. A 

wireless client associated with the ZyAIR can communicate with another 

wireless client, AP, computer or router only if the MAC addresses of those 

devices are listed in this table.Type the MAC addresses of the wireless client, 

AP, computer or router that you want to allow the ZyAIR associated wireless 

clients to have access to in these address fields. Type the MAC address in a 

valid MAC address format, that is, six hexadecimal character pairs, for 

example, 12:34:56:78:9a:bc.F

Note: The Block Intra-BSS Traffic changes from No to Yes 
when you enable layer-2 isolation.

When you have completed this menu, press [ENTER] at the prompt “Press ENTER to confirm or ESC 

to cancel” to save your configuration or press [ESC] to cancel and go back to the previous screen.