ZyXEL Communications NBG6503 User Manual
Chapter 8 Access Point Mode
NBG6503 User’s Guide
67
3
Click Start > Run on your computer in Windows. Type “cmd” in the dialog box. Enter “ipconfig” to
show your computer’s IP address. If your computer’s IP address is not in the correct range then see
show your computer’s IP address. If your computer’s IP address is not in the correct range then see
for information on changing your computer’s IP address.
4
After you’ve set your computer’s IP address, open a web browser such as Internet Explorer and
type “192.168.1.2” as the web address in your web browser.
type “192.168.1.2” as the web address in your web browser.
Note: After clicking Login, the Easy mode appears. Refer to
screens. Change to Expert mode to see the screens described in the sections
following this.
8.3.3 Configuring your WLAN, Bandwidth Management and Maintenance
Settings
Settings
The configuration of wireless, bandwidth management and maintenance settings in Access Point
mode is the same as for Router Mode.
mode is the same as for Router Mode.
for information on the configuring your wireless network.
for information on configuring your Bandwidth Management screen.
for information on configuring your
Maintenance settings.