ZyXEL Communications 650HW User Manual

Prestige 650HW ADSL Router User’s Guide

Internet Access

3-9

Figure 3-7 Menu 3.2 — TCP/IP and DHCP Ethernet Setup

Follow the instructions in the following table on how to configure the DHCP fields.

Table 3-2 DHCP Ethernet Setup Menu Fields

FIELD DESCRIPTION

EXAMPLE

DHCP Setup

DHCP If set to Server, your Prestige can assign IP addresses, an IP

default gateway and DNS servers to Windows 95, Windows NT and
other systems that support the DHCP client.
If set to None, the DHCP server will be disabled.
If set to Relay, the Prestige acts as a surrogate DHCP server and
relays DHCP requests and responses between the remote server
and the clients. Enter the IP address of the actual, remote DHCP
server in the Remote DHCP Server in this case.

When DHCP is used, the following items need to be set:

Server

(default)

Client IP Pool Starting

Address

This field specifies the first of the contiguous addresses in the IP
address pool.

192.168.1.33

Size of Client IP Pool This field specifies the size or count of the IP address pool.

Primary DNS Server

Secondary DNS Server

Enter the IP addresses of the DNS servers. The DNS servers are
passed to the DHCP clients along with the IP address and the
subnet mask.

Menu 3.2 - TCP/IP and DHCP Ethernet Setup

DHCP Setup:

DHCP= Server
Client IP Pool Starting Address= 192.168.1.33

Size of Client IP Pool= 32

Primary DNS Server= 0.0.0.0

Secondary DNS Server= 0.0.0.0

Remote DHCP Server= N/A

TCP/IP Setup:
IP Address= 192.68.1.1

IP Subnet Mask= 255.255.255.0

RIP Direction= Both

Version= RIP-1

Multicast= None

IP Policies=
Edit IP Alias= No

Press ENTER to Confirm or ESC to Cancel:

Press Space Bar to Toggle.

First address in
the IP Pool

Size of the IP
Pool

IP addresses of
the DNS
servers

This is the IP
address of the
Prestige