ZyXEL Communications VSG-1200 V2 User Manual
VSG-1200 V2 User’s Guide
Chapter 6 LAN and WAN Setup
62
6.4 LAN Configuration
To configure the LAN settings on the VSG, click System Settings and WAN/LAN to display
the screen as shown.
the screen as shown.
Figure 20 System Settings: WAN/LAN: LAN Configuration
The following table describes the LAN-related fields in this screen.
Note: You must restart the VSG if you change the IP address.
If you set the VSG as a DHCP server on the LAN, the VSG will automatically
change the LAN DHCP settings based on the new LAN IP address.
change the LAN DHCP settings based on the new LAN IP address.
6.5 WAN Configuration
To configure the WAN settings on the VSG, click System Settings and WAN/LAN. The
WAN/LAN screen varies depending on the settings in the WAN Port Mode field.
WAN/LAN screen varies depending on the settings in the WAN Port Mode field.
6.5.1 WAN MAC Address
Use the WAN/LAN screen to configure the MAC address of the WAN port by either setting
the VSG to use the factory default or specify the MAC address of a computer on the LAN.
the VSG to use the factory default or specify the MAC address of a computer on the LAN.
Table 5 System Settings: WAN/LAN: LAN Configuration
FIELD
DESCRIPTION
LAN
IP Address
Enter the LAN IP address of the VSG in dotted decimal notation. The default is
10.59.1.1.
Subnet Mask
Enter the LAN subnet mask in dotted decimal notation. The default is 255.0.0.0.