ZyXEL Communications VSG-1200 V2 User Manual
VSG-1200 V2 User’s Guide
Chapter 6 LAN and WAN Setup
64
Figure 22 System Settings: WAN/LAN: Dynamic/Static WAN IP Address
The following table describes the related labels in this screen.
6.5.3 WAN Port Mode: PPPoE
Point-to-Point Protocol over Ethernet (PPPoE) functions as a dial-up connection. PPPoE is an
IETF (Internet Engineering Task Force) draft standard specifying how a host personal
computer interacts with a broadband modem (for example DSL, cable, wireless, etc.) to
achieve access to high-speed data networks. It preserves the existing Microsoft Dial-Up
Networking experience and requires no new learning or procedures.
IETF (Internet Engineering Task Force) draft standard specifying how a host personal
computer interacts with a broadband modem (for example DSL, cable, wireless, etc.) to
achieve access to high-speed data networks. It preserves the existing Microsoft Dial-Up
Networking experience and requires no new learning or procedures.
Table 7 System Settings: WAN/LAN: WAN IP
FIELD
DESCRIPTION
WAN Port Mode
Get automatically from a
DHCP server
Select this option to set the VSG to act as a DHCP client on the WAN. The
VSG obtains TCP/IP information (IP address, DNS server information, etc.)
from a DHCP server.
Use fixed IP address
Select this option to set the VSG to use a static (or fixed) IP address. This is
the default setting.
IP Address
Enter the static IP address in dotted decimal notation. The default WAN IP
address is 192.168.1.1.
Subnet Mask
Enter the subnet mask in dotted decimal notation.
Default IP Gateway
Enter the IP address of the default gateway device.
Primary/Secondary DNS
Server
Enter the IP addresses of the primary and/or secondary DNS servers.