ZyXEL Communications AMG1302 User Manual
Chapter 7 Wireless LAN
AMG1302/AMG1202-TSeries User’s Guide
99
Figure 32
More AP: Edit
The following table describes the fields in this screen.
Table 21
More AP: Edit
LABEL
DESCRIPTION
Wireless Network Setup
Wireless
Select Enable Wireless LAN to activate wireless LAN.
Wireless Network Settings
Wireless Network Name
(SSID)
(SSID)
The SSID (Service Set IDentity) identifies the service set with which a wireless
device is associated. Wireless devices associating to the access point (AP) must
have the same SSID.
device is associated. Wireless devices associating to the access point (AP) must
have the same SSID.
Enter a descriptive name (up to 32 English keyboard characters) for the wireless
LAN.
LAN.
Hide SSID
Select this check box to hide the SSID in the outgoing beacon frame so a station
cannot obtain the SSID through scanning using a site survey tool.
cannot obtain the SSID through scanning using a site survey tool.
Client Isolation
Select this to keep the wireless clients in this SSID from communicating with each
other through the AMG1302/AMG1202-TSeries.
other through the AMG1302/AMG1202-TSeries.
MBSSID/LAN Isolation
Select this to keep the wireless clients in this SSID from communicating with clients
in other SSIDs or wired LAN devices through the AMG1302/AMG1202-TSeries.
in other SSIDs or wired LAN devices through the AMG1302/AMG1202-TSeries.
Select both Client Isolation and MBSSID/LAN Isolation to allow this SSID’s
wireless clients to only connect to the Internet through the AMG1302/AMG1202-
TSeries.
wireless clients to only connect to the Internet through the AMG1302/AMG1202-
TSeries.
Security Level