ZyXEL Communications 70 Series User Manual

ZyWALL 5/35/70 Series User’s Guide

Chapter 47 Firmware and Configuration File Maintenance

620

Figure 373   Restore Using FTP Session Example

to read about configurations that disallow TFTP and FTP 

over WAN.

Restore configuration via console port by following the HyperTerminal procedure shown next. 
Procedures using other serial communications programs should be similar.

1 Display menu 24.6 and enter “y” at the following screen.

Figure 374   System Maintenance: Restore Configuration

2 The following screen indicates that the Xmodem download has started. 

Figure 375   System Maintenance: Starting Xmodem Download Screen

3 Run the HyperTerminal program by clicking Transfer, then Send File as shown in the 

following screen.

Figure 376   Restore Configuration Example

ftp> put config.rom rom-0
200 Port command okay
150 Opening data connection for STOR rom-0
226 File received OK
221 Goodbye for writing flash
ftp: 16384 bytes sent in 0.06Seconds 273.07Kbytes/sec.
ftp>quit

Ready to restore Configuration via Xmodem.
Do you want to continue (y/n):

Starting XMODEM download (CRC mode) ...CCCCCCCCC

Type the configuration file’s location, 

or click Browse to search for it.

Choose the Xmodem protocol.

Then click Send.