ZyXEL Communications 802.11b/g/n poe access point User Manual

 Chapter 3 Status Screens

NWA1100-N User’s Guide

Use this screen to view read-only information, including Wireless Mode, Channel ID, Retry Count 
and FCS Error Count. Also provided is the "poll interval". The Poll Interval field is configurable. 
The fields in this screen vary according to the current wireless mode of each WLAN adaptor.

Click Status > Statistics. The following screen pops up.

System Status: Statistics

The following table describes the labels in this screen.

Rate

For the LAN port this displays Auto or the port speed and duplex setting that you 
configured in the System > General screen.
For the WLAN interface, it displays the downstream and upstream transmission 
rate or N/A if the interface is not in use.

SSID Status 

This is not available when the WLAN Operating Mode is Wireless Client.

Interface 

This column displays each of the NWA’s wireless interfaces.

SSID

This field displays the SSID(s) currently used by each wireless module.

BSSID

This field displays the MAC address of the wireless module.

Security

This field displays the type of wireless security used by each SSID.

VLAN

This field displays the VLAN ID of each SSID in use, or Disabled if the SSID does 
not use VLAN.

System Status

Statistics

Click this link to view port status and packet specific statistics. See 

.

Client Information

Click this to see a list of wireless clients currently associated to each of the NWA’s 
wireless modules. See 

View Log

Click this to see a list of logs produced by the NWA. See 

.

The Status Screen (continued)

System Status: Statistics

Description

This is the NWA’s wireless LAN module. 

Wireless Mode

This field shows which wireless standard the NWA is using.

Channel ID

Click this to see which wireless channels are currently in use in the local area. See 

RX PKT

This is the number of received packets on this port.