ZyXEL Communications 782M User Manual

 

 

P782M G.SHDSL Bridge 

the negotiated protocol is different from that in the user profile, even when the negotiated protocol is 
stronger than specified. If the peer disconnects right after a successful authentication, make sure that you 
specify the correct authentication protocol when connecting to such an implementation. 

To edit the remote node PPP options, move the cursor to the Edit PPP Options field in Menu 11.1 — 
Remote Node Profile, use [SPACE BAR] to select Yes and then press [ENTER] to open menu 11.2, as 
shown next. 

Menu 11.2 - Remote Node PPP Options 

 

Encapsulation= Standard PPP 

                 Compression= No 

 

Press ENTER to Confirm or ESC to Cancel: 

 

Press Space Bar to Toggle. 

The following table describes the menu 11.2 and how to configure the PPP options. 

Encapsulation 

Select Standard PPP. Select CISCO PPP only if 
the node is a Cisco computer. 

Compression 

Turn on/off Stac Compression. The default is No. 

Yes/No 

When you have completed this menu, press [ENTER] at the prompt “Press [ENTER] to confirm or [ESC] to 
cancel” to save your configuration or press [ESC] to cancel and go back to the previous screen. 

For the TCP/IP parameters, perform the following steps to edit Menu 11.3 — Remote Node Network 
Layer Options as shown next. 

Remote Node Configuration 

 

4-5