ZyXEL Communications P-660HN-F1 User Manual
Chapter 7 Wireless LAN
P-660HN-F1 User’s Guide
109
"
If you do not enable any wireless security on your ZyXEL Device, your network
is accessible to any wireless networking device that is within range.
is accessible to any wireless networking device that is within range.
Figure 49 Network > Wireless LAN > AP: No Security
The following table describes the labels in this screen.
7.2.2 WEP Encryption
Use this screen to configure and enable WEP encryption. Click Network > Wireless LAN to
display the AP screen. Select WEP Auto from the Security Mode list.
display the AP screen. Select WEP Auto from the Security Mode list.
"
WEP is extremely insecure. Its encryption can be broken by an attacker, using
widely-available software. It is strongly recommended that you use a more
effective security mechanism. Use the strongest security mechanism that all
the wireless devices in your network support. For example, use WPA-PSK or
WPA2-PSK if all your wireless devices support it, or use WPA or WPA2 if your
wireless devices support it and you have a RADIUS server. If your wireless
devices support nothing stronger than WEP, use the highest encryption level
available.
widely-available software. It is strongly recommended that you use a more
effective security mechanism. Use the strongest security mechanism that all
the wireless devices in your network support. For example, use WPA-PSK or
WPA2-PSK if all your wireless devices support it, or use WPA or WPA2 if your
wireless devices support it and you have a RADIUS server. If your wireless
devices support nothing stronger than WEP, use the highest encryption level
available.
Table 29 Network > Wireless LAN > AP: No Security
LABEL
DESCRIPTION
Security Mode
Choose No Security from the drop-down list box.