ZyXEL Communications P-660HN-F1 User Manual

Chapter 4 Internet and Wireless Setup Wizard

P-660HN-F1 User’s Guide

The following table describes the fields in this screen.

Figure 19   Internet Connection with ENET ENCAP

The following table describes the fields in this screen.

Table 10   Internet Connection with RFC 1483

IP Address

This field is available if you select Routing in the Mode field.
Type your ISP assigned IP address in this field. 

Back

Click this to return to the previous screen without saving.

Next

Click this to continue to the next wizard screen.

Exit

Click this to close the wizard screen without saving.

Table 11   Internet Connection with ENET ENCAP

Obtain an IP 
Address 
Automatically

A static IP address is a fixed IP that your ISP gives you. A dynamic IP address is not 
fixed; the ISP assigns you a different one each time you connect to the Internet.
Select Obtain an IP Address Automatically if you have a dynamic IP address.

Static IP 
Address

Select Static IP Address if your ISP gave you an IP address to use.

IP Address

Enter your ISP assigned IP address.

Subnet Mask

Enter a subnet mask in dotted decimal notation. 
Refer to the appendix to calculate a subnet mask If you are implementing subnetting.

Gateway IP 
address

You must specify a gateway IP address (supplied by your ISP) when you use ENET 
ENCAP in the Encapsulation field in the previous screen.

First DNS 
Server

Enter the IP addresses of the DNS servers. The DNS servers are passed to the DHCP 
clients along with the IP address and the subnet mask.

Second DNS 
Server

As above.

Back

Click this to return to the previous screen without saving.