ZyXEL Communications P-660HN-F1 User Manual

 Chapter 5 WAN Setup

P-660HN-F1 User’s Guide

The ZyXEL Device allows you to configure more than one Internet access connection. To 
configure additional Internet access connections click Network > WAN > More 
Connections. The screen differs by the encapsulation you select. When you use the WAN > 
Internet Access Setup screen to set up Internet access, you are configuring the first WAN 
connection.

Figure 33   Network > WAN > More Connections

Protocol Filter

Select the protocol filter(s) to control incoming traffic. You may choose up to 4 
sets of filters. 
You can configure packet filters in the Packet Filter screen. See 

 for more details.

Generic Filter

Select the generic filter(s) to control incoming traffic. You may choose up to 4 
sets of filters.
You can configure generic filters in the Packet Filter screen. See 

 for more details.

Outgoing Filter Sets

Protocol Filter

Select the protocol filter(s) to control outgoing traffic. You may choose up to 4 
sets of filters. 
You can configure protocol filters in the Packet Filter screen. See 

 for more details.

Generic Filter

Select the generic filter(s) to control outgoing traffic. You may choose up to 4 
sets of filters.
You can configure generic filters in the Packet Filter screen. See 

 for more details.

Back

Click this to return to the previous screen without saving.

Apply

Click this to save your changes. 

Cancel

Click this to restore your previously saved settings.

Table 18   Network > WAN > Internet Access Setup: Advanced Setup (continued)