ZyXEL Communications P-660HN-F1 User Manual

 Chapter 5 WAN Setup

P-660HN-F1 User’s Guide

Figure 34   Network > WAN > More Connections: Edit

The following table describes the labels in this screen.      

Table 20   Network > WAN > More Connections: Edit

General

Active

Select the check box to activate or clear the check box to deactivate this 
connection.

Name

Enter a unique, descriptive name of up to 13 ASCII characters for this 
connection.

Mode

Select Routing from the drop-down list box if your ISP allows multiple 
computers to share an Internet account. 
If you select Bridge, the ZyXEL Device will forward any packet that it does 
not route to this remote node; otherwise, the packets are discarded.

Encapsulation

Select the method of encapsulation used by your ISP from the drop-down 
list box. Choices vary depending on the mode you select in the Mode field. 
If you select Bridge in the Mode field, select either PPPoA or RFC 1483. 
If you select Routing in the Mode field, select PPPoA, RFC 1483, ENET 
ENCAP or PPPoE.