ZyXEL Communications P-2302R Series User Manual

P-2302R Series User’s Guide

Chapter 26 Remote Node Configuration

250

The following table describes the fields not already described in 

.

Move the cursor to the Edit IP field in menu 11.1, then press [SPACE BAR] to select Yes. 
Press [ENTER]

 

to open Menu 11.3 - Remote Node Network Layer Options. 

Table 105   Fields in Menu 11.1 (PPPoE Encapsulation Specific)

Service Name

If you are using PPPoE encapsulation, then type the name of your PPPoE service 

here. Only valid with PPPoE encapsulation.

Authen

This field sets the authentication protocol used for outgoing calls.
Options for this field are:
•

CHAP/PAP - Your Prestige will accept either CHAP or PAP when requested by 

this remote node.

•

CHAP- accept CHAP only. 

•

PAP- accept PAP only. 

Telco Option

Allocated Budget The field sets a ceiling for outgoing call time for this remote node. The default for 

this field is 0 meaning no budget control. 

Period(hr)

This field is the time period that the budget should be reset. For example, if we are 

allowed to call this remote node for a maximum of 10 minutes every hour, then the 

Allocated Budget is (10 minutes) and the Period(hr) is 1 (hour).

Schedules

You can apply up to four schedule sets here.

Nailed-Up 

Connection

This field specifies if you want to make the connection to this remote node a nailed-

up connection. More details are given earlier in this section.

Session Options

Idle Timeout

Type the length of idle time (when there is no traffic from the Prestige to the remote 

node) in seconds that can elapse before the Prestige automatically disconnects the 

PPPoE connection. This option only applies when the Prestige initiates the call.