ZyXEL Communications P-2302R Series User Manual

P-2302R Series User’s Guide

315

Chapter 34 System Maintenance

A list of commands can be found by typing help or ? at the command prompt. Always type 

the full command. Type exit to return to the SMT main menu when finished.

Figure 182   Valid Commands Example

The Prestige provides two call control functions: budget management and call history. Please 
note that this menu is only applicable when Encapsulation is set to PPPoE in menu 4 or 
menu 11.1.

The budget management function allows you to set a limit on the total outgoing call time of 
the Prestige within certain times. When the total outgoing call time exceeds the limit, the 
current call will be dropped and any future outgoing calls will be blocked.

To access the call control menu, select option 9 in menu 24 to go to Menu 24.9 — System 
Maintenance — Call Control, as shown in the next table.

Figure 183   Menu 24.9 System Maintenance: Call Control

Menu 24.9.1 shows the budget management statistics for outgoing calls. Enter 1 from Menu 
24.9 - System Maintenance - Call Control to bring up the following menu.

Copyright (c) 1994 - 2005 ZyXEL Communications Corp.
ras> ?
Valid commands are:
sys             exit            device           ether
poe             config          ip               ppp
bm              voice           dsp

     Menu 24.9 - System Maintenance - Call Control

          1. Budget Management
          2. Call History

         Enter Menu Selection Number: