ZyXEL Communications ZyWALL 1000 User Manual

 Chapter 6 Tutorials

ZyWALL USG 1000 User’s Guide

Figure 51   Status > Interface Status Summary, After Ethernet Interface Edits

This example sets up trunk WAN_TRUNK with ge3 and ge4. This example uses the default 
settings for the trunk and shows how to add the interfaces to it.

There are no existing trunks at the beginning of this example.

1 Click Network > Interface > Trunk. The following screen appears.

Figure 52   Network > Interface > Trunk, Initial

2 Click the Edit icon. The following screen appears.

Figure 53   Network > Interface > Trunk > Edit, Initial

3 Click the Member icon, as shown above. Select the ge2 and click the left arrow to 

remove it from the member list. Do the same for aux. Select ge4 and click the right 
arrow to add it to the member list. Then click OK.

Table 31   Trunk Example

ge1

---

ge3

WAN_TRUNK

ge4

WAN_TRUNK

ge5

---