ZyXEL Communications ZyWALL 1000 User Manual

 Chapter 6 Tutorials

ZyWALL USG 1000 User’s Guide

Figure 46   Status: Interface Status Summary After Port Grouping

This example sets up the Ethernet interfaces as shown below.

You have decided to use the default settings for ge1 and ge3, so it is not necessary to edit these 
interfaces. You can also skip ge2 because there are no physical ports associated with it 
anymore. Therefore, the following steps set up ge4 and ge5.

1 Click Network > Interface > Ethernet. The following screen appears.

Figure 47   Network > Interface > Ethernet, Initial       

2 Click the Edit icon for ge4, as shown above, and set up the IP address as shown below.

Table 30   Ethernet Interfaces Example

ge1

192.168.1.1/24, DHCP server

ge3

DHCP client

ge4

172.23.37.240/24

ge5

10.0.0.1/24, DHCP server