ZyXEL Communications ZyWALL 1000 User Manual

 Chapter 44 Service Control

ZyWALL USG 1000 User’s Guide

Admin/User 

Service Control

Admin Service Control specifies from which zones an administrator can use 

HTTPS to manage the ZyWALL (using the web configurator). You can also specify 

the IP addresses from which the administrators can manage the ZyWALL. 
User Service Control specifies from which zones a user can use HTTPS to log into 

the ZyWALL (to log into SSL VPN for example). You can also specify the IP 

addresses from which the users can access the ZyWALL. 

#

This is the index number of the service control rule.

Zone

This is the zone on the ZyWALL the user is allowed or denied to access.

Address

This is the object name of the IP address(es) with which the computer is allowed or 

denied to access.

Action

This displays whether the computer with the IP address specified above can access 

the ZyWALL zone(s) configured in the Zone field (Accept) or not (Deny).

Add icon

Click the Add icon in the heading row to open a screen where you can add a new 

rule. Refer to 

 for information on the fields.

Click the Edit icon to go to the screen where you can edit the rule.
Click the Add icon in an entry to add a rule below the current entry.
Click the Delete icon to remove an existing rule. A window display asking you to 

confirm that you want to delete the rule. Note that subsequent rules move up by one 

when you take this action.
Click the Move to N icon to display a field to type a number for where you want to 

put that rule and press [ENTER] to move the rule to the number that you typed.

HTTP

Enable

Select the check box to allow or disallow the computer with the IP address that 

matches the IP address(es) in the Service Control table to access the ZyWALL 

web configurator using HTTP connections.

Server Port

You may change the server port number for a service if needed, however you must 

use the same port number in order to use that service to access the ZyWALL.

Admin/User 

Service Control

Admin Service Control specifies from which zones an administrator can use HTTP 

to manage the ZyWALL (using the web configurator). You can also specify the IP 

addresses from which the administrators can manage the ZyWALL. 
User Service Control specifies from which zones a user can use HTTP to log into 

the ZyWALL (to log into SSL VPN for example). You can also specify the IP 

addresses from which the users can access the ZyWALL. 

#

This is the index number of the service control rule.

Zone

This is the zone on the ZyWALL the user is allowed or denied to access.

Address

This is the object name of the IP address(es) with which the computer is allowed or 

denied to access.

Action

This displays whether the computer with the IP address specified above can access 

the ZyWALL zone(s) configured in the Zone field (Accept) or not (Deny).

Add icon

Click the Add icon in the heading row to open a screen where you can add a new 

rule. Refer to 

 for information on the fields.

Click the Edit icon to go to the screen where you can edit the rule.
Click the Add icon in an entry to add a rule below the current entry.
Click the Delete icon to remove an existing rule. A window display asking you to 

confirm that you want to delete the rule. Note that subsequent rules move up by one 

when you take this action.
Click the Move to N icon to display a field to type a number for where you want to 

put that rule and press [ENTER] to move the rule to the number that you typed.

Authentication

Table 206   System > WWW (continued)