ZyXEL Communications ZyWALL 1000 User Manual
Chapter 50 Troubleshooting
ZyWALL USG 1000 User’s Guide
653
.
1 Make sure the SYS LED is on and not blinking.
2 Press the RESET button and hold it until the SYS LED begins to blink. (This usually
2 Press the RESET button and hold it until the SYS LED begins to blink. (This usually
takes about five seconds.)
3 Release the RESET button, and wait for the ZyWALL to restart.
You should be able to access the ZyWALL using the default settings.