ZyXEL Communications 5 Series User Manual

 Chapter 37 LAN Setup

ZyWALL 5/35/70 Series User’s Guide

Figure 381   Menu 3.2: TCP/IP and DHCP Ethernet Setup

Follow the instructions in the next table on how to configure the DHCP fields.

Use the instructions in the following table to configure TCP/IP parameters for the LAN port.

"

LAN and DMZ IP addresses must be on separate subnets.

      Menu 3.2 - TCP/IP and DHCP Ethernet Setup

DHCP= Server                      TCP/IP Setup:

Client IP Pool:

  Starting Address= 192.168.1.33  IP Address= 192.168.1.1

  Size of Client IP Pool= 128     IP Subnet Mask= 255.255.255.0

                                  RIP Direction= Both

                                    Version= RIP-1

                                  Multicast= None

                                  Edit IP Alias= No

DHCP Server Address= N/A

                    Press ENTER to Confirm or ESC to Cancel:

Table 224   Menu 3.2: DHCP Ethernet Setup Fields

DHCP

This field enables/disables the DHCP server.
If set to Server, your ZyWALL will act as a DHCP server.
If set to None, the DHCP server will be disabled.
If set to Relay, the ZyWALL acts as a surrogate DHCP server and relays requests 
and responses between the remote server and the clients.
When set to Server, the following items need to be set:

Client IP Pool:

Starting Address

This field specifies the first of the contiguous addresses in the IP address pool.

Size of Client IP 
Pool

This field specifies the size, or count of the IP address pool.

DHCP Server 
Address

If Relay is selected in the DHCP field above, then type the IP address of the actual, 
remote DHCP server here.

Table 225   Menu 3.2: LAN TCP/IP Setup Fields

TCP/IP Setup:

IP Address

Enter the IP address of your ZyWALL in dotted decimal notation