ZyXEL Communications max208m User Manual

Page of 290
 Chapter 12 Maintenance
WiMAX Device Configuration User’s Guide
183
12.6  SNMP
Use this screen to allow remote access to the WiMAX Device from a network connection over SNMP.
Click Maintenance > Remote MGMT > SNMP to open this screen as shown next.
Figure 109   
SNMP Screen
This screen contains the following fields:
12.7  CWMP
Use this screen to allow CWMP connections for remote management, firmware upgrades and 
troubleshooting.
Table 85   
SNMP
LABEL
DESCRIPTION
Enable
Select this to enable remote management using this service.
Location
Enter the location of the SNMP server (for example, “Engineering Dept., Floor 6, 
Building A, New York City”).
Contact
Enter contact information for the administrator managing the SNMP server (for 
example, “Bill Smith, IT Dept., (555) 555-5454”).
Read Community
Enter the password for the incoming Get and GetNext requests from the 
management station. The default is public and allows all requests.
Write Community
Enter the password for incoming Set requests from the management station. 
The default is public and allows all requests.
Trap Server
Enter the IP address of the station to send your SNMP traps to.
Trap Community
Enter the trap community, which is the password sent with each trap to the 
SNMP manager. The default is public and allows all requests.