ZyXEL Communications max208m User Manual
Chapter 7 Network Setting
WiMAX Device Configuration User’s Guide
105
Click Add in the Network Setting > Route > Static Route screen to open this screen as shown
next.
next.
Figure 53
Static Route Screen
This screen contains the following fields:
7.13 RIP
Use these settings to configure how the WiMAX Device exchanges information with other routers.
Table 36
Static Route
LABEL
DESCRIPTION
Destination IP
Enter the destination IP address of the static route.
Subnet Mask
Enter the subnet mask of the static route.
Next Hop
Select Interface and then select WAN or LAN for the next hop of the static
route.
route.
If the next hop is an IP address rather than an interface on the WiMAX Device,
select IP Address and enter the IP address.
select IP Address and enter the IP address.
Metric
Enter the static route metric.