ZyXEL Communications MAX-306M1 User Manual
Chapter 12 The Service Configuration Screens
User’s Guide
140
12.2.1.6 Custom Tones (IVR)
IVR (Interactive Voice Response) is a feature that allows you to use your
telephone to interact with the WiMAX Modem. The WiMAX Modem allows you to
record custom tones for the Caller Ringing Tone and On Hold Tone functions.
The same recordings apply to both the caller ringing and on hold tones.
telephone to interact with the WiMAX Modem. The WiMAX Modem allows you to
record custom tones for the Caller Ringing Tone and On Hold Tone functions.
The same recordings apply to both the caller ringing and on hold tones.
Expiration Time Keep the default value, unless your VoIP service provider tells you to
change it. Enter the number of seconds the SIP server should provide
the message waiting service each time the WiMAX Modem subscribes to
the service. Before this time passes, the WiMAX Modem automatically
subscribes again.
the message waiting service each time the WiMAX Modem subscribes to
the service. Before this time passes, the WiMAX Modem automatically
subscribes again.
Fax Option
G.711 Fax
Passthrough
G.711 Fax
Passthrough
Select this if the WiMAX Modem should use G.711 to send fax
messages. The peer devices must also use G.711.
messages. The peer devices must also use G.711.
T.38 Fax Relay
Select this if the WiMAX Modem should send fax messages as UDP or
TCP/IP packets through IP networks. This provides better quality, but it
may have inter-operability problems. The peer devices must also use
T.38.
TCP/IP packets through IP networks. This provides better quality, but it
may have inter-operability problems. The peer devices must also use
T.38.
Call Forward
Call Forward
Table
Call Forward
Table
Select which call forwarding table you want the WiMAX Modem to use
for incoming calls. You set up these tables in VOICE > Phone Book >
Incoming Call Policy.
for incoming calls. You set up these tables in VOICE > Phone Book >
Incoming Call Policy.
Caller Ringing
Enable
Enable
Check this box if you want people to hear a customized recording when
they call you.
they call you.
Caller Ringing
Tone
Tone
Select the tone you want people to hear when they call you. See
for information on how to record
these tones.
On Hold
Enable
Enable
Check this box if you want people to hear a customized recording when
you put them on hold.
you put them on hold.
On Hold Tone
Select the tone you want people to hear when you put them on hold.
See
See
these tones.
Back
Click this to return to the SIP Settings screen without saving your
changes.
changes.
Apply
Click to save your changes.
Reset
Click to restore your previously saved settings.
Table 44 VOICE > Service Configuration > SIP Settings > Advanced (continued)
LABEL
DESCRIPTION
Table 45 Custom Tones Details
LABEL
DESCRIPTION
Total Time for All Tones
128 seconds for all custom tones combined