ZyXEL Communications ZyWALL5UTM 4.0 User Manual

ZyWALL 5/35/70 Series User’s Guide

91 

Chapter 3 Wizard Setup

Figure 27   VPN Wizard: Network Setting

The following table describes the labels in this screen. 

Table 16   VPN Wizard : Network Setting

Network Policy 

Property

Active

If the Active check box is selected, packets for the tunnel trigger the ZyWALL to build 

the tunnel. 
Clear the Active check box to turn the network policy off. The ZyWALL does not apply 

the policy. Packets for the tunnel do not trigger the tunnel.

Name

Type up to 32 characters to identify this VPN network policy. You may use any 

character, including spaces, but the ZyWALL drops trailing spaces.

Network Policy 

Setting

Local Network

Local IP addresses must be static and correspond to the remote IPSec router's 

configured remote IP addresses. 
Select Single for a single IP address. Select Range IP for a specific range of IP 

addresses. Select Subnet to specify IP addresses on a network by their subnet mask.

Starting IP 

Address

When the Local Network field is configured to Single, enter a (static) IP address on 

the LAN behind your ZyWALL. When the Local Network field is configured to Range 

IP, enter the beginning (static) IP address, in a range of computers on the LAN behind 

your ZyWALL. When the Local Network field is configured to Subnet, this is a (static) 

IP address on the LAN behind your ZyWALL.

Ending IP 

Address/

Subnet Mask

When the Local Network field is configured to Single, this field is N/A. When the 

Local Network field is configured to Range IP, enter the end (static) IP address, in a 

range of computers on the LAN behind your ZyWALL. When the Local Network field 

is configured to Subnet, this is a subnet mask on the LAN behind your ZyWALL.