ZyXEL Communications ZyWALL5UTM 4.0 User Manual

ZyWALL 5/35/70 Series User’s Guide

Chapter 3 Wizard Setup

92

Figure 28   VPN Wizard: IKE Tunnel Setting

Remote 

Network

Remote IP addresses must be static and correspond to the remote IPSec router's 

configured local IP addresses. 
Select Single for a single IP address. Select Range IP for a specific range of IP 

addresses. Select Subnet to specify IP addresses on a network by their subnet mask.

Starting IP 

Address

When the Remote Network field is configured to Single, enter a (static) IP address 

on the network behind the remote IPSec router. When the Remote Network field is 

configured to Range IP, enter the beginning (static) IP address, in a range of 

computers on the network behind the remote IPSec router. When the Remote 

Network field is configured to Subnet, enter a (static) IP address on the network 

behind the remote IPSec router

Ending IP 

Address/

Subnet Mask

When the Remote Network field is configured to Single, this field is N/A. When the 

Remote Network field is configured to Range IP, enter the end (static) IP address, in 

a range of computers on the network behind the remote IPSec router. When the 

Remote Network field is configured to Subnet, enter a subnet mask on the network 

behind the remote IPSec router.

Back

Click Back to return to the previous screen. 

Next

Click Next to continue. 

Table 16   VPN Wizard : Network Setting