ZyXEL Communications P-660HN-T1H User Manual

Chapter 8 Wireless LAN

P-660HN-T1H User’s Guide

Use this screen to edit an SSID profile. Click the Edit icon next to an SSID in the 
More AP screen. The following screen displays.

Figure 50   Network > Wireless LAN > More AP: Edit

The following table describes the fields in this screen.

Apply

Click this to save your changes.

Cancel

Click this to restore your previously saved settings.

Table 33   Network > Wireless LAN > More AP

Table 34   Network > Wireless LAN > More AP: Edit

Network Name 
(SSID)

The SSID (Service Set IDentity) identifies the service set with which 
a wireless device is associated. Enter a descriptive name (up to 32 
printable 7-bit ASCII characters) for the wireless LAN. 

Note: If you are configuring the ZyXEL Device from a computer 

connected to the wireless LAN and you change the 
ZyXEL Device’s SSID or security settings, you will lose 
your wireless connection when you press Apply to 
confirm. You must then change the wireless settings of 
your computer to match the ZyXEL Device’s new settings.

Hide SSID

Select this check box to hide the SSID in the outgoing beacon frame 
so a station cannot obtain the SSID through scanning using a site 
survey tool.

Security Mode

See 

 for more details about this field.

MAC Filter 

This shows whether the wireless devices with the MAC addresses 
listed are allowed or denied to access the ZyXEL Device using this 
SSID.

Edit

Click this to go to the MAC Filter screen to configure MAC filter 
settings. See 

 for more details.