ZyXEL Communications P-660HN-T1H User Manual
Chapter 8 Wireless LAN
P-660HN-T1H User’s Guide
114
8.5 The WPS Station Screen
Use this screen to set up a WPS wireless network using either Push Button
Configuration (PBC) or PIN Configuration.
Configuration (PBC) or PIN Configuration.
Click Network > Wireless LAN > WPS Station. The following screen displays.
Figure 52 Network > Wireless LAN > WPS Station
PIN Number
This shows the PIN (Personal Identification Number) of the ZyXEL
Device. Enter this PIN in the configuration utility of the device you want
to connect to using WPS.
Device. Enter this PIN in the configuration utility of the device you want
to connect to using WPS.
The PIN is not necessary when you use WPS push-button method.
Generate
Click this to have the ZyXEL Device create a new PIN.
WPS Status
This displays Configured when the ZyXEL Device has connected to a
wireless network using WPS or Enable WPS is selected and wireless or
wireless security settings have been changed. The current wireless and
wireless security settings also appear in the screen.
wireless network using WPS or Enable WPS is selected and wireless or
wireless security settings have been changed. The current wireless and
wireless security settings also appear in the screen.
This displays Unconfigured if WPS is disabled and there is no wireless
or wireless security changes on the ZyXEL Device or you click Release
to remove the configured wireless and wireless security settings.
or wireless security changes on the ZyXEL Device or you click Release
to remove the configured wireless and wireless security settings.
Release
This button is available when the WPS status is Configured.
Click this button to remove all configured wireless and wireless security
settings for WPS connections on the ZyXEL Device.
settings for WPS connections on the ZyXEL Device.
Apply
Click this to save your changes.
Refresh
Click this to restore your previously saved settings.
Table 35 Network > Wireless LAN > WPS
LABEL
DESCRIPTION